Installation; Indoor Installation; Outdoor Installation - Quasar CP-3211 User And Installation Manual

5 Installation

Follow the instructions below for indoor and outdoor installation of the Quasar PTZ series of
cameras.

5.1 Indoor Installation

This section applies to the following cameras:

CP-3211-180

CP-4221-200
Read the instructions provided in this chapter thoroughly before installing the camera. Following are
additional considerations for indoor installation:

There must be a fuse or circuit breaker at the starting point of the electrical wiring
infrastructure.

For indoor installations, such as industrial applications, the camera must be protected from
hostile external elements (e.g. corrosive environment, metallic dust, extreme temperatures,
soot, moisture, over spray, etc.)

Do not place the camera on or near radiators and heat sources.

All electrical work must be performed in accordance with local regulatory requirements.

5.2 Outdoor Installation

This section applies to the following cameras:

CP-3211-181

CP-3211-181-HPoE

CP-4221-201

CP-4221-201-HPoE

CP-4221-301-HPOE
Read the instructions provided in this chapter thoroughly before installing the camera. Following are
additional considerations for outdoor installation:

For outside wiring installation, always use weatherproof equipment, such as boxes,
receptacles, connectors, etc.

For electrical wiring, use the properly rated sheathed cables for conditions to which the
cable will be exposed (for example, moisture, heat, UV, physical requirements, etc.).

Plan ahead to determine where to install infrastructure weatherproof equipment. Whenever
possible, ground components to an outdoor ground.

Use best security practices to design and maintain secured camera access, communications
infrastructure, tamper-proof outdoor boxes, etc.

All electrical work must be performed in accordance with local regulatory requirements.
Related Links

Power and Ethernet
Cable Connection
 
Initial Camera
Configuration
Preparing the Camera
for Mounting
Installation

Mounting
Instructions
11