14
ELECTRICAL SYSTEM
14.8
Changing the headlight bulb
Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
–
Position brake line guide
Guideline
Screw, headlight mask
601793-11
Finishing work
–
Check the headlight setting. (
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the headlight mask with the headlight. (
. Mount and tighten screws
4
M5
p. 143)
p. 136)
.
5
5 Nm (3.7 lbf ft)
139