14
ELECTRICAL SYSTEM
14.12
Adjusting the headlight range
–
The rider, with luggage and a passenger if applicable, now sits down on the motorcycle.
–
Switch on the low beam.
–
Check the headlight setting.
For a ready-to-operate motorcycle with a rider, and with luggage and a passenger if
applicable, the light-dark boundary must lie exactly on the lower mark.
»
If the boundary between light and dark does not meet specifications:
–
Adjust the headlight range. (
Preparatory work
–
Check the headlight setting. (
Main work
–
Turn adjusting screw
Guideline
The boundary between light and dark must be exactly on the lower mark for a motor-
cycle with a rider (instructions on how to apply the mark: Checking the headlight set-
ting).
Info
Turn clockwise to increase the headlight range; turn counterclockwise to reduce
601796-10
the headlight range.
If you have a heavy payload, you will need to correct the headlight range.
p. 144)
p. 143)
to adjust the headlight range.
1
144