10
TUNING THE CHASSIS
10.13
Handlebar position
10.14
Adjusting handlebar position
On the upper triple clamp, there are 2 holes at a distance
Distance
between holes
A
The holes on the handlebar support are placed at a distance
Distance
between holes
B
The handlebar can be mounted in 4 different positions. In this way, the handlebar can be
installed in the position most comfortable for the rider.
401454-11
x
–
Remove the four screws
lay it to one side.
Info
Protect the motorcycle and its attachments from damage by covering them.
Do not bend the cables and lines.
–
Remove the two screws
–
Place the handlebar support in the required position. Fit and tighten the two screws
Guideline
401454-10
Screw, handlebar support
Info
Position the left and right handlebar supports evenly.
15 mm (0.59 in)
3.5 mm (0.138 in)
. Remove the handlebar clamp. Remove the handlebar and
1
. Remove the handlebar support.
2
M10
40 Nm
(29.5 lbf ft)
to each other.
A
from the center.
B
Loctite
®
243™
76
.
2