KTM 690 Enduro R USA 2013 Owner's Manual page 109

12 BRAKE SYSTEM
–
Move the brake fluid reservoir mounted on the handlebar to a horizontal position.
–
Remove screws
–
Remove cover
–
Press the brake caliper by hand onto the brake disc in order to retract the brake pistons.
Ensure that brake fluid does not flow out of the brake fluid reservoir, extracting it by
suction if it does.
Info
Make sure when pushing back the brake pistons that you do not press the brake
601806-11
caliper against the spokes.
–
Remove cotter pin
brake linings.
–
Clean brake caliper and brake caliper support.
400418-11
.
1
with membrane .
2 3
, remove pin toward the right by striking it, and remove the
4 5
107