KTM 690 Enduro R USA 2013 Owner's Manual page 134

14 ELECTRICAL SYSTEM
Main work
–
Connect the battery charger to the battery. Switch on the battery charger.
Battery charger (58429074000)
You can also use the battery charger to test rest potential and start potential of the bat-
tery, and to test the alternator. With this device, you cannot overcharge the battery.
Info
Never remove lid
Charge the battery with a maximum of 10% of the capacity specified on the bat-
tery housing
–
Switch off and disconnect the charger after charging.
Guideline
The charge current, charge voltage and charge time must not be exceeded.
Charge the battery regularly when the
motorcycle is not in use
100151-10
Finishing work
–
Install the battery.
–
Mount the seat. (
–
Set the clock. (
.
1
.
2
3 months
x ( p. 129)
p. 84)
p. 38)
132