Preparing For Use After Storage - KTM 690 Enduro R USA 2013 Owner's Manual

19 STORAGE
19.2

Preparing for use after storage

–
Cover the motorcycle with a tarp or similar cover that is permeable to air.
Info
Do not use non-porous materials since they prevent humidity from escaping,
thus causing corrosion.
Avoid running the engine for a short time only. Since the engine cannot warm
up properly, the water vapor produced during combustion condenses and causes
valves and exhaust system to rust.
–
Remove the motorcycle from the lift stand. (
–
Recharge the battery.
–
Install the battery.
–
Set the clock. (
–
Refuel. (
–
Perform checks and vehicle care when preparing for use. (
–
Take a test ride.
401059-01
x ( p. 130)
x ( p. 129)
p. 38)
p. 60)
p. 78)
p. 51)
170