Changing The Turn Signal Bulb - KTM 690 Enduro R USA 2013 Owner's Manual

14 ELECTRICAL SYSTEM
14.10

Changing the turn signal bulb

Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
–
Pull bulb socket
–
Pull parking light bulb
–
Insert a new parking light bulb in the bulb socket.
Parking light (W5W / socket W2.1x9.5d) (
–
Insert the bulb socket in the reflector.
–
Insert the protection cap.
600612-10
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
out of the reflector.
2
out of the bulb socket.
3
p. 143)
p. 186)
p. 138)
142