12
BRAKE SYSTEM
–
Check that leaf spring
support are seated correctly.
400418-10
–
Insert the brake linings, insert the pin, and mount the cotter pin.
–
Operate the hand brake lever repeatedly until the brake linings are in contact with the
brake disc and there is a pressure point.
101057-01
–
Adjust the brake fluid level to level
Guideline
Measurement
Brake fluid DOT 4 / DOT 5.1 (
–
Position the cover with the membrane. Mount and tighten the screws.
Info
Clean up overflowed or spilt brake fluid immediately with water.
601806-12
in the brake caliper and sliding plate
6
.
A
A
p. 193)
in the brake caliper
7
5 mm (0.2 in)
108