Electrical System; Removing The Battery - KTM 690 Enduro R USA 2013 Owner's Manual

Motorcycle ktm
Hide thumbs Also See for 690 Enduro R USA 2013:
Table of Contents

Advertisement

14

ELECTRICAL SYSTEM

14.1

Removing the battery

Warning
Risk of injury Battery acid and battery gases cause serious chemical burns.
Keep batteries out of the reach of children.
Wear suitable protective clothing and goggles.
Avoid contact with battery acid and battery gases.
Keep the battery away from sparks or open flames. Charge only in well-ventilated areas.
In the event of skin contact, rinse with large amounts of water. If battery acid gets in the eyes, rinse with water for at least 15
minutes and contact a physician.
x
Preparatory work
Switch off all power consumers and switch off the engine.
Remove the seat. (
Main work
Disconnect the negative (minus) cable of the battery.
Pull plug
1
Remove screws
Pull the retaining bracket
Take off the positive pole cover
Disconnect the positive (plus) cable of the battery.
Push the wiring harness to the side and pull the battery out of the battery holder.
601812-10
Info
Never operate the motorcycle with a discharged battery or without a battery. In
both cases, electrical components and safety devices can be damaged. The vehi-
cle is therefore no longer roadworthy.
p. 84)
off upward.
.
2
of the battery forward and remove it.
3
.
4
128

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents