16
TUNING THE ENGINE
16.3
Adjusting the engine characteristic
Main work
–
Move the handlebar to the straight-ahead position.
–
Use the KTM diagnostics tool to set the throttle stepper motor to the neutral position.
–
Loosen lock nut
–
Set the play in the throttle cable by turning adjusting screw
Guideline
Throttle cable play
–
Tighten lock nut
100280-10
Preparatory work
–
Switch off the ignition by turning the ignition key to position OFF
–
Remove the seat. (
Main work
–
Pull the Map‑Select switch and holder
–
Pull the Map‑Select switch out of the holder.
601801-10
.
1
.
1
p. 84)
upward off of the retaining bracket.
1
.
2
3... 5 mm (0.12... 0.2 in)
.
153