13
WHEELS, TIRES
–
Check the wheel bearing for damage and wear.
»
If the wheel bearing is damaged or worn:
–
Replace the wheel bearing.
–
Clean and grease the shaft seal rings
ings.
Long-life grease (
–
Insert the spacers.
800080-11
–
Position the front wheel and insert the wheel spindle.
The brake linings are correctly positioned.
–
Mount and tighten screw
Guideline
Screw, front wheel spindle
–
Activate the hand brake lever multiple times until the brake linings are in contact with
the brake disc.
601808-11
–
Remove the motorcycle from the lift stand. (
–
Pull the front wheel brake and push down hard on the fork several times to align the
fork legs.
–
Tighten screws
Guideline
Screw, fork stub
x
and bearing surface
1
p. 198)
.
2
.
3
of the distance bush-
A
M24x1.5
45 Nm
(33.2 lbf ft)
p. 78)
M8
15 Nm
(11.1 lbf ft)
119