Rear Panel Connections - Datavideo HS-2200 Quick Start Manual

Rear Panel Connections

Ethernet Port
For remote control interface (TBD).
RS-232 / RS-422 Remote
For remote control interface (TBD).
GPI
The GPI socket can be used for simple external control.
Note: Please into the HS-2200 MENU selects GPI SETTINGS to
setup GPI function.
TO BELTPACK (For Intercom)
Channel Input / Output XLR Sockets
Each of the 8 channels has an XLR connector that carries bi-
directional signals between the ITC-150 and ITC-100SL. All
connections are contained within the one cable.
AUDIO Inputs
Supports four channels XLR Balanced Audio Input.
MONITOR F/W Upgrade
Socket is for monitor F/W upgrade.
AUDIO Outputs
Supports two channels XLR Balanced Audio output.
Console Port
This 9pin D-Sub connector is used to connect the Control Panel /
Keyboard to the rear of the HS-2200 Main Processing unit.
POWER SWITCH
Switches the power On / Off.
MONITOR HDMI IN
The HS-2200 provides a useful connection for confidence
monitoring of HDMI sources on location.
Grounding Terminal
When connecting this unit to any other component, make sure that
it is properly grounded by connecting this terminal to an
appropriate point. When connecting, use the socket and be sure to
2
use wire with a cross-sectional area of at least 1.0 mm .
6