Nose Gear Installation - Seagull Models Ryan Navion Instruction Manual

Instruction Manual.
RYAN NAVION

NOSE GEAR INSTALLATION.

PARTS REQUIRED
Trim and cut.
3) Install the muffler and muffler extension
onto the engine and make the cutout in the
cowl for muffler clearance. Connect the fuel
and pressure lines to the carburetor, muffler
and fuel filler valve. Secure the cowl to fuse-
Install the pushrod wire as shown.
lage using the 3x10mm screws.
M2 clevis.
Machine Screw M3x10mm.
COWLING.
1) Slide the fiberglass cowl over the
engine and line up the back edge of the cowl .
4 pcs.
Electric Conversion (Ep Power)
(OPTION).
Trim and cut.
10