junger d07 Operation Manual page 60

OPERATION
Now you must press the <SCAN> button. The application will connect with the first server from your
list and will scan all devices within the range described above.
When closing the application it will write an INI-file into the installation directory and will use these
settings for the next time you run the application :
processing display
menu bar device communication preset control
push button functions parameter displays & drag label
function buttons
The GUI is divided into several sections. On the top you will find the MS-Windows menu bar.
From there you can load and store files, select the physical interface of the PC (TCP/IP), select two
operation options and set up TCP/IP.
There is no on line Help menu available, only the submenu <About> :
The About window shows some system information such as PC OS, device hardware information and
the DSP as well as the controller firmware of a device.
page 4-2