Basic Functions; Online Remote Operation; Offline Editing Of Parameters - junger d07 Operation Manual

on-line remote control of C8007 or d07 digital transmission processors
-
setting up the hardware
-
storage of preset data and hardware setup data on HD
-
- upload of preset data from HD into the processor
- off-line editing of preset data
If the soft button <CONNECT> is turned on (green letters), the application is on line in other words
connected with a pre selected device. Now you will be able to :
- set the processing parameters live
- read the level meter displays and processing displays
- set the setup parameters
edit preset data off-line in the background of the actual processing
-
store preset data and hardware setup data on the PCs HD
-
If the soft button <CONNECT> is turned off (black letters) you are off line in other words
disconnected from a pre selected device. Now you will be able to :
- change processing parameters without effecting the actual processing
- edit setup parameters
- edit preset data
- store preset data and hardware setup data on the PCs HD
There is one exception: If the option "Overwrite current parameters" is not checked, the "on air"
parameters will not be changed.

1.2 ONLINE REMOTE OPERATION

1.3 OFFLINE EDITING OF PARAMETERS

Connecting / reconnecting with the device will transfer all
data from the device and will overwrite the applications data.
All previously made settings in the GUI will be lost!
UPLOAD data to the device will overwrite the data of the
device. When finished it will read back the new data from the
device and will display this data in the applications GUI.
The original device data will be lost!
INTRODUCTION
1. INTRODUCTION

1.1 BASIC FUNCTIONS

1.4 DATA TRANSFER
page 1-1