Figure 5-2: Network Card-Ms; Figure 5-3: Px Gateway Card - Eaton 93PM User And Installation Manual

30-200 kw ups

Hide thumbs Also See for 93PM:

Table of Contents

Figure 5-2: Network Card-MS

• PX Gateway Card

Provides remote monitoring through a Web browser interface, e-mail, and a network

management system (NMS) using SNMP and connects to a twisted-pair Ethernet (10/100BaseT)

network. The card also provides direct integration of UPS information (meters and status) to a

Building Management System (BMS) using the Modbus RTU and TCP protocols.

• Relay Card-MS

Two types of interfaces via a DB9 connector are available with this card. Dry contact mode

provides a simple way to transmit UPS information to an alarm system, PLC, or computer

system via dry relay contacts. By default the transmitted information is load powered, load on

bypass, load on battery, load on utility, battery fault, and low battery. RS232 mode provides an

RS232 interface for connection to a PC or to a UPS Control display unit. Jumpers are used to

select the interface (contacts or RS232).

30-200 kW

User's and Installation Guide

P-164000249

Revision 2

Table of Contents