High Voltage Power Supply; Integrated Tray Compensator Assembly - IBM Infoprint 1130 Service Manual

Hide thumbs Also See for Infoprint 1130:

Table of Contents

IBM Infoprint 1130/1140

High Voltage Power Supply

1. Remove the inner paper deflector.

2. Remove the toner sensor cable from the retainer (A) on the

front of the HVPS.

3. Remove the right side cover.

4. Disconnect the HVPS cable from the HVPS at connector (C).

5. Disconnect the transfer roll cable from the HVPS board.

Warning: Use care when disconnecting the cable from the

transformer on the HVPS. The cable and connector can be

easily damaged.

6. Remove the HVPS mounting screw (B).

7. Slide the HVPS to the left to release the mounting tab from the

center pan and remove the HVPS.

1. Remove the paper tray.

2. Remove the left door.

Repair Information

Infoprint 1140