Table of Contents
Advertisement
IBM Infoprint 1130/1140
Error Code
929 Toner Sensor
930 Printhead
Error
932-935
Printhead Error
932 Printhead
Error
933 Printhead
Error
934 Printhead
Error
935 Printhead
Error
936-937
Transport Motor
936 - Main Drive
Motor initial lock
failure
937 - Main Drive
Motor lost lock
939 RIP-Engine
Communications
Lost
2-4
Service Manual
Action
The toner sensor is not operating properly, the developer
drive assembly is not operating properly or the print
cartridge is defective. Go to the
Check" on page
The wrong printhead is installed. Replace with the
correct printhead.
These errors represent a problem with the printhead. Go
to the
"Printhead Service Check" on page
Indicates a problem with the main drive motor. Go to the
"Main Drive Service Check" on page
The RIP and engine cannot communicate with one
another. The system board or Interconnect board is
defective. Check for correct installation. If no problem is
found, replace the FRUs in the following order:
System Board
Interconnect Board
Note: If a problem still exists, the RIP software can
cause a 939 error code. Contact your next level for
software support.
"Toner Sensor Service
2-122.
2-108.
2-85.
Advertisement
Table of Contents
