Fuser Detack Housing Assembly - IBM Infoprint 1130 Service Manual

IBM Infoprint 1130/1140
4. Gently pry the detack finger and spring from the housing
assembly.

Fuser Detack Housing Assembly

1. Remove the fuser assembly.
2. Remove the fuser cover assembly.
3. Remove the fuser lamp. Use care when handling the lamp.
4. Disengage the hot roll bearing clips to free the fuser frame
walls.
5. Gently apply outward pressure on the left and right fuser side
frames (A) to release the detack housing assembly (B).
4-32
Service Manual