IBM Infoprint 1130 Service Manual page 72

IBM Infoprint 1130/1140
Symptom Table - Output Expander
Symptom
Printer does not display Output
Bin Full.
Paper does not feed all the way
into the output tray.
Symptom Table - StapleSmart Finisher
Symptom
Finisher does not staple.
Printer does not recognize
StapleSmart Finisher Option as
being installed.
Close Top Cover displayed.
Unable to clear or reset message
(POST incomplete).
Close Finisher Side Cover
displayed. Unable to clear or reset
message (POST incomplete).
Paper feeds into finisher option
output tray. Paper is not stapled
and paper does not align with the
right side.
Paper feeds into finisher option.
Paper aligns with the right side.
The stapler does not staple.
Paper is transported into the
output tray but is not stapled.
Stapled sheets are not
transported to the output tray.
Action
Go to the "Output Bin Sensor
Standard Tray Service Check" on
page 2-90.
Go to the "Output Expander
Service Check" on page 2-91.
Action
Go to the "StapleSmart Finisher
Service Check" on page
Go to the "StapleSmart Finisher
Service Check" on page
Go to the "StapleSmart Finisher
Service Check" on page
Go to the "StapleSmart Finisher
Service Check" on page
Go to the "StapleSmart Finisher
Service Check" on page
Go to the "StapleSmart Finisher
Service Check" on page
Go to the "StapleSmart Finisher
Service Check" on page
Go to the "StapleSmart Finisher
Service Check" on page
Diagnostic Information
2-125.
2-125.
2-125.
2-125.
2-125.
2-125.
2-125.
2-125.
2-45