Table of Contents
Advertisement
IBM Infoprint 1130/1140
To test the Finisher Top Cover and Side Door sensors:
Select Sensor Tests from the Finisher menu.
Select Cover and Door from the Sensor Test menu.
The following screen is displayed and each sensor can be checked
by opening or closing the correct cover or door.
Cover and Door
TC=CL SD=CL
TC=Finisher Top Cover
SD=Stapler Side Door
To test the Finisher Pass Thru and Media Sensors:
Select Sensor Tests from the Finisher menu.
Select Pass Thru and Media from the Sensor menu.
The following screen is displayed and each sensor can be checked
by actuating its flag.
Pass Thru and Media
P=OP M=OP
P=Pass Thru Sensor
M=Media Sensor
To test the Bin Level Sensor:
Select Sensor Tests from the Finisher menu.
Select Bin Level from the Sensor menu.
The following screen is displayed and each sensor can be checked.
Bin Level
EM=OP NF=OP F=OP
EM=Finisher Bin Empty Sensor
NF=Finisher Bin Full Sensor
F=Finisher Bin Near Full Sensor
3-25
Diagnostic Aids
Advertisement
Table of Contents
