General Specifications
9.
General Specifications
9.1
Absolute Maximum Ratings
Operating an SE7500CW2 baseboard at conditions beyond those shown in the following table
may cause permanent damage to the system. The table is provided for stress testing purposes
only. Exposure to absolute maximum rating conditions for extended periods may affect system
reliability.
Operating Temperature
Storage Temperature
Voltage on any signal with respect to ground
3.3 V Supply Voltage with Respect to ground
5 V Supply Voltage with Respect to ground
Notes:
•
Chassis design must provide proper airflow to avoid exceeding Intel® Xeon processor
maximum case temperature.
•
VDD means supply voltage for the device
9.2
SE7500CW2 Power Budget
The following table shows the power consumed on each supply line for a Intel
SE7500CW2 that is configured with two processors (each 30W max), >1GHz FMB @ 75%
usage. This configuration includes four DIMMs stacked burst at 70% max. The numbers
provided in the table should be used for reference purposes only. Different hardware
configurations will produce different numbers. The numbers in the table reflect a common usage
model operating at a higher than average stress levels.
96
Revision 1.40
SE7500CW2 Server Board Technical Product Specification
Table 62. Absolute Maximum Ratings
5 degrees C to 50 degrees C
-55 degrees C to +150 degrees C
2
-0.3 V to Vdd + 0.3V
-0.3 V to 3.63 V
-0.3 V to 5.5 V
1
®
Server Board