Table 25: Console Redirection Submenu - Intel SE7500CW2 Technical Product Specification

SE7500CW2 Server Board Technical Product Specification
6.5.6.5 Console Redirection Submenu
To access this submenu, select Advanced on the menu bar at the top of the screen and then
Console Redirection.
Main Advanced
I/O Device Configuration
On Board Device
PCI Configuration
Server Menu
Console Redirection
Event Logging
Hardware Monitor
Table 26 lists the options available through the Console Redirection submenu. This submenu
provides additional options to configure the console.
Table 26: Console Redirection Submenu
Feature
COM Port Address
Baud Rate
Console Type
Flow Control
61
Revision 1.40
(default)
Security Power
Choices Description
Disabled When enabled, console redirection uses the I/O port
(default) specified. All keyboard/mouse and video will be directed to
this port. This setting is designed to be used only under
On-board
DOS in text mode.
COM A
On-board
COM B
300 When console redirection is enabled, specifies the baud
rate to be used.
1200
2400
9600
19.2k
(default)
38.4k
57.6K
115.2k
PC ANSI Enables the specified console type.
(default)
VT100
None
XON/XOFF None disallows flow control.
CTS/RTS XON/XOFF is software-based asynchronous flow control.
(default)
CTS/RTS is hardware-based flow control.
When EMP is sharing the COM port as console redirection,
the flow control must be set to CTS/RTS.
Boot System
System BIOS
Exit