Table 36: Crisis Disk Boot Block Bios Post Task Point - Intel SE7500CW2 Technical Product Specification

SE7500CW2 Server Board Technical Product Specification
Tpoint
Fade out OEM screen.
Reset video: clear screen, reset cursor, reload DAC.
ENDIF
ENDIF
B6h If password on boot is enabled, a call is made to Setup to check password. If the user does not enter a
valid password, Setup does not return.
B7h Initialize ACPI BIOS.
B9h Clear all screen graphics before booting.
BAh Initialize the SMBIOS header and sub-structures.
BCh Clear parity-error latch
BDh Display Boot First menu if MultiBoot is installed.
BEh If BCP option is enabled, clear the screen before booting.
BFh Check virus and backup reminders. Display System Summary.
C0h Try to boot with INT 19
C1h Initialize the Post Error Manager.
C2h Write PEM errors.
C3h Display PEM errors.
Note: Warm start only tasks are shaded, the Cold Start only tasks have heavy border.
Tpoint
80h
81h
82h
83h
84h
85h
86h
87h
88h
89h
8Ah
8Bh
8Ch
8Dh
8Eh
8Fh
90h
91h
92h
93h
94h
95h
96h
75
Revision 1.40

Table 36: Crisis Disk Boot Block BIOS POST task point

Initialize the chipset
Initialize the bridge.
Initialize the CPU.
Initialize system timer.
Initialize system I/O
Check force recovery boot.
Check sum BIOS ROM.
Go to BIOS
Initialize Multi Processor.
Set Huge Segment.
Initialize OEM special code.
Initialize PIC and DMA.
Initialize Memory type.
Initialize Memory size.
Shadow Boot Block.
System memory test.
Initialize interrupt vector.
Initialize Run Time Clock.
Initialize video.
Initialize System Management Mode.
Output one beep
Boot to Mini DOS.
Clear Huge Segment
Error Reporting and Handling
Description
Description