Table of Contents
Advertisement
SE7500CW2 Server Board Technical Product Specification
6.5.8
Power Menu
To access this menu, select Power on the menu bar at the top of the screen.
Main
Advanced
Table 30 lists the options available on the Power menu. This menu is designed to disable ACPI
automatic reboot in the S0 or S4 states. If these submenus are enabled and AC power is lost,
the server power and its operating system will remain off.
Table 30: Power Menu
Power Loss Control
Power Button
6.5.9
Boot Menu
To access this menu, select Boot on the menu bar at the top of the screen.
Main
Advanced
Table 31 lists the options available on the Boot menu. This menu allows you to set the boot
priority of devices installed in the system. Use the following key combinations to navigate
between or view the devices and change the boot priority:
1. <Enter> expands or collapses devices with a "+" or "-."
2. <CTRL + Enter> expands all devices.
3. <Shift+1> enables or disables devices.
4. <+> and <-> moves the device up or down.
5. <n> May move the removable device between the hard drive or removable disk.
6. <d> Removes a device that is not installed.
65
Revision 1.40
Security
Power
Device
Description
Stay Off
Specifies the power level the system returns to after
AC power is lost.
Last State
(default)
Stay Off leaves the server power disabled and ACPI
does not function to reboot the server in the event of a
power failure..
Last State reboots the system according to ACPI
standards..
Disable
Enables or disables the power button functionality.
Enable
(default)
Security
Power
Boot
System
Boot
System
System BIOS
Exit
Exit
Advertisement
Table of Contents
