Honeywell OMNI 624 Installation And Setup Manual page 24

Fbii security system
Hide thumbs Also See for OMNI 624:
Table of Contents

Advertisement

OMNI624 Installation and Setup Guide
1)
ZONE STATUS LEDS (XK108)
These LEDs display the current zone status including alarms, bypasses, and faults. Each condition
will cause these LEDs to operate differently as follows:
ALARMS Fast Blink (approx. 150mS ON – 150mS OFF).
TROUBLES Slow Pulse (approx. 600mS ON – 600mS OFF).
BYPASSES Blink (100mS ON – 900mS OFF). Zone bypasses are displayed as a very slow blink
of the zone LED light.
FAULTED ZONES Solid ON. Faulted zones are the lowest-priority indication. Faulted
burglary zones are displayed with the LED solidly ON while the system is disarmed.
NORMAL OFF
Upon entry, the keypad sounder will annunciate to warn the user to disarm the system. In
addition, the respective zone LED(s) will be ON to indicate zones which are violated (e.g., entry
door and motion detector).
2)
ARM/DISARM LED (ALL KEYPADS)
This LED/display indicates that the system is currently armed (ON) or disarmed (OFF).
Fast Blink
Alarm mode (alarms have occurred)
Slow Blink
Unable to communicate with central station
3)
STAY LED
This LED/display indicates that the system has been armed in the STAY, STAY/INSTANT, or
AUTO/STAY mode. STAY/INSTANT is enabled in programming Question 14, Location 1. The
STAY LED indicates the following:
ON
Stay/AutoStay zones are bypassed
OFF
Stay/AutoStay zones are normal
4)
INSTANT LED
This LED/display indicates that the system has been armed in the INSTANT or STAY/INSTANT
mode, meaning that the system is currently armed, all delay zones are instant (no delay time). See
programming Question 14, Location 1.
ON
Delay zones are currently instant
OFF
Delay zones are normal
5)
AC/LOW BATTERY LED
This LED/display indicates the current power status of the panel as follows:
ON
AC is present
OFF
No AC, running on battery backup
Slow Blink
Low-battery condition detected
6)
READY LED
This LED/display indicates that the system is ready for arming. The READY LED is common to all
BURGLARY ZONES with the following indications:
ON
System ready to be armed
OFF
System not ready to be armed
5–2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents