Installer Modes Summary - Honeywell OMNI 624 Installation And Setup Manual

Fbii security system
Hide thumbs Also See for OMNI 624:
Table of Contents

Advertisement

KEY ENTRY
[#]
[✱] + 00–99
[CODE] + 1–6
[✱] + [BYPASS] + 1–3
[INSTANT]
[STAY]

Installer Modes Summary

There are 9 installer modes in this panel.
TO ENTER INSTALLER MODES, press [CODE] + [✱] + Installer Code + X
where: [CODE]
[✱]
Installer Code
X
FUNCTION
Advance to the next location within the current question; or advance to the
next question if already displaying the last location in the current question.
Go to a specific question selected by 00 to 99.
Enter A through F as data where:
[CODE] + [1] = A
[CODE] + [2] = B
[CODE] + [3] = C
Change mode where:
[✱] + [BYPASS] + [1] = submode 1
[✱] + [BYPASS] + [2] = submode 2
[✱] + [BYPASS] + [3] = submode 3
Advance to the next question.
Exit the programming mode.
CODE button
Star (✱) button
4- or 6-digit Installer Code as programmed; default = 2468
Single digit indicating the installer mode, as follows:
1 INSTALLER KEYPAD PROGRAMMING
4 submodes:
1- System Options
2- Zone and Report Code Programming
3- Wireless Zone/Keyfob Programming
4- Zone Descriptor Programming (LCD keypads only)
2 PROGRAMMING REVIEW MODE (no changes can be made)
4 submodes:
1- System Options
2- Zone and Report Code Programming
3- Wireless Zone/Keyfob Programming
4- Zone Descriptor Programming (LCD keypads only)
3 WALK TEST WITH REDUCED RF GAIN
4 SYSTEM LOG VIEW (LCD keypads only)
5 SYSTEM DEFAULT
6 CLEAR TAMPER FAULTS (if programmed)
8 UNATTENDED DOWNLOAD
9 ON-LINE DOWNLOADING
Section 6. System Programming
[CODE] + [4] = D
[CODE] + [5] = E
[CODE] + [6] = F
6–5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents