Motorola WS5100 Series Migration Giude page 115

• Click on the Next button to continue.
c. Use the third page of the wizard to enter the mandatory details required to create a certificate.All
fields marked with an astreik (*) are mandatory.
• Select the Configure the trustpoint
configured as a trustpoint.
• Define the Country used in the Self-Signed Certificate. By default, the Country is US. The field
can be modified by the user to other values. This is a required field and must not exceed 2
characters.
• Enter a State/Prov. for the state or province name used in the Self-Signed Certificate. By default,
the State/Prov. field is Province. This is a required field.
• Enter a City to represent the city name used in the Self-Signed Certificate. By default, the City
name is City. This is a required field.
• Define an Organization
Company Name. The user is allowed to modify the Organization name. This is a required field.
• Enter an Org. Unit for the name of the organization unit used in the Self-Signed Certificate. By
default, it is Department Name. This is a required field.
• Define a Common Name for the URL of the switch. This is a required value. The Common Name
must match the URL used in the browser when invoking the switch applet.
• Enter a fully qualified domain name (FQDN)
the node's position in the DNS tree hierarchy absolutely. To distinguish an FQDN from a regular
domain name, a trailing period is added. ex: somehost.example.com. An FQDN differs from a
regular domain name by its absoluteness; as a suffix is not added.
• Specify the switch IP address
• Enter an alphanumeric
checkbox to enable the new self signed certificate to be
for the organization used in the Self-Signed Certificate. By default, it is
is an unambiguous domain name that specifies
used as the switch destination for certificate requests.
password used to access the certificate configuration.
8-7
Certificate Management