Configuring Acl Using The Web Ui; Configuring Ip Standard Acl - Motorola WS5100 Series Migration Giude

10-12 WS5100 Series Switch Migration Guide
WS5100(config)#wlan-acl 2 150 out
WS5100(config)#

10.5 Configuring ACL using the Web UI

The following types of ACL configuration scenarios are explained below:
•

Configuring IP Standard ACL

• Configuring MAC Extended ACL
•
10.5.1 Configuring IP Standard ACL
To configure IP Standard ACL using Web UI, follow the steps mentioned below:
1. Click on Security
Configuration
2. To add a new ACL, click on the
a. Select an Standard ACL from
operations.
b. Click OK
> ACL from the main menu tree. The ACLs window by default displays the
tab.
Add button in the ACLs section.
ACL Type
and close the dialog box.
drop down box. This uses source IP addresses for matching