Motorola WS5100 Series Migration Giude page 136

9-16 WS5100 Series Switch Migration Guide
WS5100 has primary and secondary LADAP servers. The table below displays the LDAP configuration used
to access Active Directory. The parameters used within the parenthesis are WS5100 CLI parameters.
Parameter Used
LDAP Server IP (host)
LDAP Server Port (port) 389
LDAP Bind DN (bind-dn) cn=blradmin,ou=WID,dc=TVLAB01,d
LDAP Base DN (base-dn) ou=WID,dc=TVLAB01,dc=com
Password (passwd)
LDAP Login Attribute
(login)
Value
192.192.4.42
c=com
Motorola123
(sAMAccountName=%{Stripped-
User-Name:-%{User
-Name}})
Description
The IP address of the server PC running the Active
Directory Service.
The port number on which the active directory
service is listening. Default port number is 389.
Allows the radius server to get bind to the Active
Directory using the administrator user name and
password.
In the above example the 'blradmin' is the user
with administrative privileges for WID
organization in the domain TVLAB01.com and the
password for the user blradmin will be configured
in the Password field.
For the above example use the details displayed
in Figure 9.2 as Active Directory.
Bind DN = "cn=blradmin,ou=WID,
dc=TVLAB01,dc=com"
Password = "Motorola123"
Another example as of above:
Base DN = "cn= Administrator,
cn=Users,dc=dynamic,dc=s99999,dc
=jp,dc=wal-mart,dc=com".
Password= "Motorola123"
These fields (Base DN, Bind DN and Password)
will be used by the radius server to log onto the
active and search for the requested users within
this base.
The top level of the LDAP directory tree is the
base, referred to as the "base DN". In the above
example we are working within a 'WID'
organizational unit and under the domain
TVLAB01.com as show in Figure
for BaseDN for the above example would be
Base DN =
"ou=WID,dc=TVLAB01,dc=com"
Another example, if you are using the users
configured in the Users folder of Active Directory
with in the domain dynamic.s99999.jp.wal-
mart.com then the
Base DN =
"cn=Users,dc=dynamic,dc=s99999,d
c=jp,dc=wal-mart,dc=com"
Password for accessing Active Directory
(password for blradmin), mentioned in Bind DN.
This filter is used to bind to Active Directory.
9.2. The format
.
.