a. Click on
Add
button to create an crypto map transform set.
• Enter the
Seq #
for the new transform set. This seq # should be the same as used when creating the
crypto map entry in step 5. The sequence number determines its priority among crypto maps. The
lower the number, the higher the priority.
• Enter the
Crypto Map Name
• Enter the
IP Sec Tranform set
• Click on
OK
button to save the configuration of the new crypto map transform set.
For more details on configuring a IPSec Transform set, refer to
Configuring transform-set using CLI on page
created in step 5.
key created in Step 3.
11-7.
11-29
VPN