Adding A New Dhcp Pool; Configuring Crypto Policy (Ike) - Motorola WS5100 Series Migration Giude

3-20 WS5100 Series Switch Migration Guide

3.4.2.2 Adding a New DHCP Pool

1. Click the Add
2. In the Pool Name
requests on this interface. In the case of our example we'll call this pool
3. For the sake of this example, we will skip the Domain,
not necessary for this setup.
4. Enter the name of the boot file used for this pool within the
5. From the Network
requests between the DHCP Server and DHCP clients. For this example enter 157.235.188.0 for IP address
and 24 for subnet.
6. The Lease Time
this example leave the
7. We will also skip the
8. Provide the Included Ranges
enter 157.235.188.2 in the Start IP field and 157.235.188.50 in the End IP field.
This provides 49 addresses that can be assigned to clients on this network.
9. Click OK to save and add the changes to the running configuration and close the dialog.
10.Click the Apply button on the main DHCP screen to save the configuration and then click the
DHCP Server

3.4.3 Configuring Crypto Policy (IKE)

IKE automatically negotiates IPSec security associations (SAs) and enables IPSec secure communications
without costly manual pre-configuration.
IKE provides the following benefits:
• Eliminates the need to manually specify all the IPSec security parameters in the crypto maps at both
peers.
button at the bottom of the screen.
field, enter the name of the IP pool from which IP addresses can be issued to client
field, define the IP Address
field defines one of the two kinds of leases the DHCP Server assigns to its clients. For
Lease Time field, set at the default of 1:00:00.
Server section since it is irrelevant to this example.
(starting and ending IP addresses) for this particular pool. For this example
button to restart the DHCP server with the new settings.
Wireless Clients.
NetBios Node, and
Boot File parameter.
and Subnet Mask used for DHCP discovery and
Boot File fields as they are
Restart