Motorola WS5100 Series Migration Giude page 153

3. To apply a rule to the ACL created in step 2 above, select it from the ACLs section and click on the
button in the Associated Rules section.
a. Enter a precedence (priority) value between 1 and 5000 in the
The rules within an ACL will be applied to packets based on their precedence value. Rules with
higher precedence are always applied first.
b. Use the Operation
c. In the Filters section, select a
The source is the source address of the network or host in dotted decimal format. The Source-mask
is the network mask.
d. Use the Source Address
e. Define a WLAN Index
f. Click OK to apply the changes and close the dialog box.
4. Click on the Attach tab in the ACLs window and click on the
drop-down menu to define a permit, deny or mark designation for the ACL.
Source Wildcard/Mask
field to enter the IP address from where the packets are sourced.
(between 1 -32) to associate an existing WLAN with this ACL Rule.
Precedence field.
from the drop-down menu.
Add button to attach the ACL to an interface.
10-13
ACL
Add