Motorola WS5100 Series Migration Giude page 96

6-28 WS5100 Series Switch Migration Guide
requests between the DHCP Server and DHCP clients, are populated with the details based on the
selection of the associated VLAN.
NOTE: To avoid multiple restarts of DHCP Server, restart the DHCP Server only after
making all the required configuration updates.
f. Within the
its clients:
• Infinite - If selected, the client can used the assigned address indefinitely.
• Actual Interval - Select this checkbox to manually define the time interval for clients to use the DHCP
server assigned addresses. The default lease time is 600 seconds, with a minimum setting of 10
seconds and a maximum value of 946080000 seconds.
g. Within the
Remove
h. Provide the
Use the
A network pool without any include range is as good as not having a pool, because it won't be useful
in assigning addresses.
i. Click OK
completes the creation of a Network Pool.
j. Click on
For more information on DHCP Network Pool configuration, refer to
Lease Time section, define one of the two kinds of leases the DHCP Server assigns to
Servers section, change the server type used with the pool and use the
buttons to add and remove the IP addresses of the routers used.
Included Ranges (starting and ending IP addresses) for this particular pool.
Insert and Remove buttons as required to define the range of supported IP addresses.
to save and add the changes to the running configuration and close the dialog. This
Restart DHCP Server button to activate the network pool.
Insert
Creating network pool on page 6-3
and