Port Leds; 10/100/1000Base-T Twisted Pair Port Leds - Allied Telesis AT-9424Ts Installation Manual

Port LEDs

10/100/1000Base-
T Twisted Pair
Port LEDs
The following sections describe the twisted pair and fiber optic port LEDs.
Each twisted pair port has two LEDs labeled L/A (link/activity) and D/C
(duplex mode/collisions). The L/A LED indicates the speed and activity on
a port. The D/C LED indicates the duplex mode (full- or half-duplex) and
the status of collisions on the port.
Table 3 describes the LEDs for the 10/100/1000Base-T twisted pair ports.
Table 3 Twisted Pair Port LEDs
LED Function
L/A Link Status
and Activity
D/C Duplex
Mode and
Collisions
State Description
Off No link is established between the
port and the end node.
Solid The port has established a link at
green 1000 Mbps.
Flashing Packets are being received or
green transmitted at 1000 Mbps.
Solid The port has established a link at 10
amber or 100 Mbps.
Flashing Packets are being received or
amber transmitted at 10 or 100 Mbps.
Green The port is operating in full-duplex
mode.
Amber The port is operating in half-duplex
mode. (Only when operating at 10 or
100 Mbps.)
Flashing Collisions are occurring on the port.
amber (Only when operating at 10 or 100
Mbps, half duplex mode.)
AT-9400Ts Stack Installation Guide
25