To Replace The Dvd-Rom Drive; Figure 2-5 Removing A Dvd-Rom Drive (Sun Fire V240 Shown) - Sun Microsystems Sun Fire V210 Manual

To Replace The DVD-ROM Drive

1. Power down the server.
See "Controlling Server Power" on page 24.
2. Open the bezel.
See "To Open The Front Bezel" on page 22.
3. Unclip the catches that fasten the DVD-ROM drive to the chassis.
See .
FIGURE 2-5
4. Pull the DVD-ROM drive towards you until it is free of its connectors and out of
the chassis.
5. Insert the new DVD-ROM drive.
6. Press it home firmly until the clips engage with the server's chassis.
7. Close the bezel.
Removing a DVD-ROM Drive (Sun Fire V240 Shown)
FIGURE 2-5
Chapter 2 Removing and Replacing Components 33