To Disable Asr - Sun Microsystems Sun Fire V210 Manual

2. Set the obdiag-trigger variable to power-on-reset, error-reset, or user-
reset. For example, type:
ok setenv obdiag-trigger user-reset
3. Type:
ok reset-all
The system permanently stores the parameter changes and boots automatically if the
OpenBoot variable auto-boot? is set to true (its default value).
Note – To store parameter changes, you can also power cycle the system using the
front panel Power button.

To Disable ASR

1. At the system ok prompt, type:
ok setenv diag-switch? false
2. Type:
ok reset-all
The system permanently stores the parameter change.
Note – To store parameter changes, you can also power cycle the system using the
front panel Power button.
84 Sun Fire V210 and V240 Servers Administration Guide • April 2003