Front Panel Features; On/Standby Switch; Figure 1-4 Location Of Front Panel Features - Sun Microsystems Sun Fire V210 Manual

Front Panel Features

Access to the front panel is by opening the bezel, which you do by rotating it
forwards. It has no clips or locks to hold it closed, only the spring retention built into
its hinges.
The front panel contains the following:

On/Standby switch

Hard disk drive
DVD-ROM drive
System configuration card
Sun Fire V240 server only: keyswitch
Hard disk drive
DVD-ROM drive
System configuration card
Location Of Front Panel Features
FIGURE 1-4
On/Standby Switch
Access to the On/Standby switch is by opening the front bezel. The On/Standby
switch controls only the power state of the server, it does not isolate the server from its
electrical power source.
The On/Standby switch is a momentary switch and has two operation modes:
On/Standby switch
Chapter 1 Introduction 7