Keyswitch (Sun Fire V240 Server Only) - Sun Microsystems Sun Fire V210 Manual

TABLE 1-6
Parameter
security-#badlogins
diag-script
diag-level
diag-switch?
error-reset-
recovery
pcia-probe-list

Keyswitch (Sun Fire V240 server only)

The Sun Fire V240 server has a keyswitch that provides control over the following
aspects of the server's operation:
Power state
Security level
Diagnostics level
Located behind the front bezel, it is a rotary switch with four positions, operated by
a key supplied with the server. The key is shipped in a clip on the back of the bezel.
12 Sun Fire V210 and V240 Servers Administration Guide • April 2003
OBP Configuration Parameters Stored On The System Configuration Card
Default
none
none
max
false
boot
Description
Number of incorrect security password
attempts
Defines how diagnostic tests are run
(options are off, min, med, max)
If true:
• Run in diagnostic mode
• After a boot request, boot diag-file
from diag-device
If false:
• Run in non diagnostic mode
• Following a boot request, boot boot-
file from boot-device
Command to execute following a system
reset generated by an error
Identifies number and order in which pci
slots are probed