Basic Operation; Channel Selection - Icom IC-M90 Instruction Manual

■ Channel selection

IMPORTANT: Prior to using the transceiver for the first
time, the battery pack must be fully charged for optimum
life and operation. To avoid damage to the transceiver,
turn the power OFF while charging.
D Channel 16
Channel 16 (Distress channel) is used for establishing initial
contact with another station and for emergency communi-
cations. Channel 16 is automatically monitored during both
dualwatch and tri-watch. While standing by, you must moni-
tor Channel 16.
q Push [16•
] to select Channel 16.
9
w Push [CH/WX•
] to return to the condition before se-
U/I/C/L
lecting Channel 16, or push [Y]/[Z] to select the operating
channel.
Push

BASIC OPERATION

D Channel 9 (Call channel)
Channel 9 is the leisure-use call channel. Each regular
channel group has separate call channels. In addition, the
call channel is monitored during tri-watch. The call channels
can be re-programmed (p. 10) and may be used to store
your most often used channels in each channel group for
quick recall.
q Push [16•
] for 1 sec. to select the call channel.
9
• "CALL" and the call channel number appear.
• Call channel can be re-programmed. See the "Call channel
programming" on p. 10 for details.
w Push [CH/WX•
] to return to the condition before se-
U/I/C/L
lecting Channel 9 (call channel), or push [Y]/[Z] to select
the operating channel.
Push
for 1 sec.
4
3
4
7