Set Mode; Set Mode Programming - Icom IC-M90 Instruction Manual

8

SET MODE

■ SET mode programming

SET mode is used to change the condition of 17 transceiver
functions: Beep tone function, Weather alert function, Prior-
ity scan function, Scan resume timer, Auto scan function,
Dual/tri-watch function, Monitor switch action, Backlighting
function, LCD contrast selection, Auto power save function,
Self check function, Battery voltage indicator, Signal strength
indicator, Squelch sensitivity, Scrambler code, VOX gain and
VOX delay.
D SET MODE ITEMS The displays show the default settings, and the selected item is displayed in the dotted circle.
VOX gain
Scrambler code
Squelch sensitivity
Signal strength
indicator
16
VOX delay Beep tone
Starting item
: Push
: Push
Battery voltage Self check
D SET mode operation
q Turn power OFF.
w While pushing [SQL•
SET mode.
• "bp" (Beep tone function setting) appears.
e Push [SQL•
MONI
desired item, if necessary.
r Push [Y]/[Z] to select the desired condition of the item.
t To exit the SET mode, push [16•
Weather alert Priority scan
Push and
and
Power save
], turn power ON to enter the
MONI
] or [SQL• ] and [Y]/[Z] to select the
MONI
].
9
Scan resume timer Auto scan
Dual/Tri-watch
Monitor switch
Backlighting
LCD contrast