Icom IC-M90 Instruction Manual page 38

SET MODE (pgs. 16 21)
q
While pushing
[SQL ],
MONI
turn power ON.
w
Push [SQL ]
MONI Refer to pgs. 16 21 for set
mode item.
again to select
an item.
e
Push [Y]/[Z] to select the desired
condition.
r
Push [16 ] to return to regular
9
operating mode.
WEATHER ALERT (pgs. 8, 17)
q
Turn the weather alert item in the
SET mode ON (p. 17).
w
Select WX channel; or start scanning.
DUALWATCH/TRI-WATCH (p. 14)
q
Select dual or tri-watch in the SET
mode (p. 18).
w
Push [Y]/[Z] to select the desired
channel.
e
Push [SCAN ] for 1 sec. to
DUAL
start dualwatch or
(depending on SET mode).
r
To cancel dualwatch/tri-watch,
push [SCAN ] again.
DUAL
TAG CHANNELS (p. 13)
q
Push [Y]/[Z] to select the desired
channel.
w
Push [Y]/[Z] for 1 sec. to change
the TAG setting ON and OFF.
LOCK FUNCTION (p. 10)
Push [Hi/Lo
for 1 sec. to turn
the lock function
ON and OFF.
SQUELCH LEVEL (p. 11)
tri-watch
Push [SQL
squelch level with [Y]/[Z].
MONITOR FUNCTION (p. 10)
q
Select monitor switch action in
SET mode (p. 18).
w
Push [SQL
active the monitor function.
SCAN (pgs. 12, 13)
Push [SCAN
scanning.
]
], then adjust the
MONI
] for 1sec. to
MONI
] to start/stop
DUAL