Icom IC-M90 Instruction Manual page 27

D VOX gain "ga"
Adjusts the VOX gain (from 1 to 6) to level when speaking
with the optional headset.
• In case of setting to 1, the VOX gain sets to sharpening.
• In case of setting to 6, the VOX gain sets to dulling.
VOX gain 3 (default)
D VOX delay "dL"
Sets the VOX delay timer (0.5 to 3.0 sec. in 0.5 sec. steps)
that keeps on transmitting after you stop speaking.
• In case of setting to 0.5 (0.5 sec.), the VOX delay sets to short.
• In case of setting to 3.0 (3.0 sec.), the VOX delay sets to long.
VOX delay 1.0 (default)
VOX gain 6
VOX delay 3.0
*default setting
SET MODE LIST
Function Indication
Beep tone function
Weather alert function
Priority scan function
Scan resume timer
Auto scan function
Dual/Tri-watch function
Monitor switch action
Backlighting function
LCD contrast selection
Auto power save function
Self check function
Battery voltage indicator
Signal strength indicator
Squelch sensitivity
Scrambler code
VOX gain
VOX delay
8
SET MODE
Switch
"bP" OFF/ON*/US
"AL" OFF*/ON
"Pr" OFF*/ON
"St" OFF*/ON
"AS" OFF*/ON
"dt" Dual*/Tri
"Sq" Push*/Hold
"bL" OFF/1/2/3*
"LC" 1/2/3*/4
"PS" OFF/ON*
"SC" OFF*/ON
"bt" OFF*/ON
"SI" OFF*/ON
"SS" OFF*/ON
"cd" 1*/2/· · ·/31/32
"ga" 1/2/3*/4/5/6
"dL" 0.5/1.0*/1.5/2.0/2.5/3.0
8
21