.
i
ELECTRICAL SYSTEM
Seaion
4
SECTION 4
ELECTRICAL SYSTEM
4.1 INTRODUCTION
All of the electric components beiig used on this machine have obtained the CE designations.
Therefore, the only reason to replace or repair the electrical system is the l i i t e d life for each part.
In addition, the IP ratings of the electric components are IP54 or above which comply with
the safety rules of CE.
4.2 LAYOUT OF THE ELECTRICAL COMPONENTS
Both the layouts of the electric components in the electrical
box
and on the machine are
shown in Fig. 4.1 and Fig. 4.2 below.
Fig. 4.1 The Electrical Components Layout In The Electrical Box