KBC BAH-1010AVS Instruction Manual page 109

I
REFERENCE
Appendix
APPENDIX D
MAINTENANCE SCHEDmE
*
Please check the cutting fluid level, add fluid
as
necessary. If the fluid appears contaminated or
deteriorated, drain and replace it.
Please check the saw blade to ensure that it is properly positioned on both the drive and driven
wheels.
Please make sure that the saw blade is properly clamped by the left and right inserts (blade guides).
$ r
Please check the wire brush for proper contact with the saw blade. Replace the wire brush if it is
worn.
9
Please remove saw chips and clean the machine when discharging the cutting fluid and when work
has
been completed.
w
When cutting fluid is being discharged during saw blade operation, please follow the safety
method carefully. Otherwise, it will greatly increase your chance of hand injury.
9
Lubricate the following items:
Front vise slide plates Rigid column
Rear vise slide plates
Quick approach device
Feed cylinder guide shafts
Rear vise guide bars
Once
every
month
~.
Please apply grease to theTollowing items:
+
rive
wheel
+
Drivenwheel
+
Blade tension device
+
Wormshaft
Recommended Grease:
Shell Alvania EP Grease 2
Mobil Mobilplex 48
Once every sixmonths
b
Please clean the filters in the cutting fluid tank.
-
b
Please replace the transmission oil after the first three months (or 600 hours of operation)
Thereafter, every six months (or every 1200 hours of operation), whichever occurs first. Check the
sight gauge to ascertain the transmission oil level.
Recommended Oil:
Shell Tellus 75
Mobil Mobilplex 48
b
Reulace the hvdraulic oil.
Recommended Oil:
Shell Tellus 27, Mobil DTE Oil Light Hydraulic 28.