Controlpanel - KBC BAH-1010AVS Instruction Manual

I
OPERATING INSTRUCTION
Sedion
3
3 3 CONTROLS DESCRIPTION
AND
OPERATION INSTRUCTION
3.3.1 Control Panel
The 11 functions of the control gears on the panel are illustrated and described below.
1. CUTTING PIECE counter
2. POWER indicator lamp
3. AUTOMAhWAL select switch
4.
MOTION DETECTOR ONIOFF safety switch
5. MANUAL
FORWARDtBACKWARD STOCK FEED select switch
6 . BLADE D m ONtOFF button (with light)
7. MACHRE ON buttons
8. EMERGENCY STOP button
9. SAW BOW UP MOVEMENT button
10. SAW BOW DOWN MOVEMENT button
11. COOLANT SUPPLY select switch (on/o@
12. DOWNFEED RATE CONTROL dial
1.
CUTTING PIECE counter
This counter is used to preset the number of cuts required in the automatic mode. When the counter
reaches the preset number, the machine is turned off automatically.
COUNT readout (white color digital number):
Automatically counts and indicates the number of pieces already cut in the automatic mode. The
count range is 1 to 99999.
Press down ' ' I "
type
button at left side to reset.