KBC BAH-1010AVS Instruction Manual page 61

I
OPERATING INSTRUCTIONS
EN 292
,ARD REFERENCE
Description
Hazards generatcd by
neglecting ergonomic
principles in machine
design (mismatch of
machinery with
l l u n ~ a n characteristics
and abilities) caused
for example by:
Unhealthy postures or
excessive efforts
Inadequate
consideration of human
hand-arm or foot-leg
anatomy
Neglected use of
personal pmtcction
equipment
Inadequate area
ligllting
Mental overload or
underload, stress. etc.
Human error
HAZARD SITUATION
Lifting and reaching while
handling workpiece, saw blades
and machine parts.
(Do not apply).
The machine is not supposed to be
used with these human body.
Iiandling of workpiece, saw blades,
machine assemblies, ctc.
Judgment and accuracy of manual
actions impaired during
handlinglpositioning of workpiece
and saw blades
Increased incidence of reasonably
foreseeable misuse: inattention,
inadvertent operation of controls.
Reasonably foreseeable misuse.
Inadvettent operation of control.
Incorrect workpiece and saw blade
handling setting.
PROCESS
During loading, unloading and
maintenance.
When use manual mode control.
When loading the workpiece.
When replacing the saw blade.
During loading and unloading.
During process control and saw blade
handling.
During the long period of working on the
machine.
When replacing the saw blade.
When replacing the motor driving belts.
DANGER ZONE
At load/unload and saw blade mounting
positions and maintenance action points.
Near the workpiece.
Near the saw blades.
Near the saw bow, saw blade, and
clamping vise.
Near the drive wheel.
Near the moving parts.
RELATED
DOCUMENT