KBC BAH-1010AVS Instruction Manual page 54

-
. .
.
.
. ~.
,
.
.
OPERATING INSTRUCTION
Seaon 3
Unfolding saw blade:
When you decide to unfold saw blade for new one changing, you tin follow method as illustrations
-
show:
-Please wear leather gloves and protective goggles in those procedures.
STEP
a
1
Installing saw blade:
1. Turn
on power to move saw head upward until the wheel covers can freely open and close.
2. Please disconnect power by depressing button (7) on the control panel to turn the machine off and
disconnect power from the machine.
3. Remove blade guards.
4. Open the wheel covers fully and make sure they remain in a steady position.
5. Loosen the tension on the blade by turning the saw blade tension handle to move the driven wheel
closer to the drive wheel.
6. Push down the saw blade from where it inserts the rollers. (Caution: make sure no one will
accidentally put power back on the machine, then wear leather gloves to handle the blade.)
7. Loosen the wire brush lock lever, and lower the wire brush.
8. Clean the saw band guides before installing a new saw blade.