KBC BAH-1010AVS Instruction Manual page 57

OPERATING INSTRUCTIONS
CHECK LIST OF HAZARDS
K TABLE OF
EN292 LIST OF HAZARDS
le following table checks all the hazards listed on EN292 regulations. However, for those hazards that do not apply to our product, we put "Do not
on the hazard situation column. The last column on the table shows the document number of risk assessment which will be addressed in section 7.4,
a1 construction file.
Stabbing or I'uncture
Hazard
Friction or Abrasion
hazard
Iiigh Pressure fluid
injection hazard
liandling saw blade.
Handling saw swarf.
Touch the driving belts
Hydraulic system breaking.
When replacing saw blade.
Remove chips from the machine.
During sawing.
During the sawing process.
Near the saw teeth.
On the chip removing device.
The drive belt.
Near the breaking hydraulic pipes.